| 1. | Theoretical analysis method of various projects must be based on reasonable soil physical property parameters
各种实际工程的理论分析方法，都必须以合理的土体物性参数为基础。 |
| 2. | Owing to the problem is very complex , and the strict theoretical analysis method is a less , so that still adopt the experiental formulas are in the majority in practice
由于问题的复杂，严格的理论分析方法较少，在实际应用中仍采用经验公式居多。 |
| 3. | According to mechanism of low - frequency broadband noise of the propeller , theoretical analysis method is given and numerical calculation of the noise is worked out as well
在分析螺旋桨低频宽带噪声成因的基础上得到了理论计算方法，并作了数值计算。 |
| 4. | Two types of research methods for spi , i . e . the theoretical analysis method and the experimental method , as well as their characteristics , applicability , and some related problems are reviewed
介绍国内外桩土相互作用两大类研究方法理论分析方法、试验方法各自的特点和适用范围，并分析了其各自存在的主要问题。 |
| 5. | 2 . several theoretical analysis methods of fiber grating characteristics are presented , including the mode - coupling theory , transfer matrix method , multi - film method and fourier transfer method . the spectra of the fbg and lpg have been analyzed by these methods . the multiplexing techniques and fiber grating demodulation methods are introduced in this dissertation
2 、系统介绍了光纤光栅的理论分析方法,并利用这些方法中的耦合模理论、传输矩阵法和傅立叶变换法对布拉格光栅、长周期光栅、啁啾光栅的光谱特性进行了分析并详细介绍了光纤光栅传感的复用技术和解调技术。 |
| 6. | The theoretical analysis method is used to study the electro - thermally excited mechanism of silicon microcantilever beam so as to obtain the temperature field distribution under the electro - thermal excitation of the microcantilever beam and to deduce thermal moment force of the electro - thermal excitation of the plated film bi - layer silicon - microcantilever beam
摘要用理论分析方法研究了硅微悬臂梁的电热激振机理，得到了微机械悬臂梁电热激励下的温度场分布，并推导出了镀膜双层硅微悬臂梁的电热激励热力矩。 |
| 7. | In the paper , theoretical analysis method is applied to analyze the endured force of these important regions , determine the style of forming in these regions and reveal the technological characteristic of the forming of stepped tubular part . it is the first time to divide the one - off drawing of stepped tubular part into two stages from the forming mechanics theory . by these methods , it established the basis in determining the forming law of one - off drawing
并采用理论分析方法，全面地分析了几个重要区的变形和受力情况，确定了这些区的变形方式、变形特点、变形性质，揭示了阶梯筒形件的成形工艺特点，首次从变形力学理论的角度将阶梯筒形件的一次拉深成形过程分为两个阶段，为确定其一次拉深成形的规律奠定了基础。 |
| 8. | This thesis adopted the theoretical analysis method , the contrast analysis method and the experience analysis method , analyzed the present situation and its defects deeply of d & o liability insurance in china , and then constructed the legal system of d & o liability insurance of china suitable to the occasion
本文采取了理论分析、对比分析和实证分析的研究方法,对我国董事责任保险的现状及缺陷进行了深刻的剖析,在此基础上对我国董事责任保险法律制度体系的构建进行了切合实际的探讨。 |
| 9. | So , it is definitely different from other amb - ab . three aspects have been studied theoretically in this paper which were based on an analysis of a compliant multleaf journal self - acting air bearing , which are as follows : ( 1 ) a set of theoretical analysis method which include the development of . physical and mathematical model , the solution of governing equations and the prediction of static and dynamic performance of the foil gas bearing is proposed . the above theoretical analysis method provides a possibility for numerical analysis
本文在分析悬臂型弹性箔片径向动压气体轴承工作原理的基础上，做了以下几个方面的工作： ( 1 )建立了悬臂型弹性箔片径向动压气体轴承的物理和数学模型，确立并求解了控制方程，得到了静、动态性能的稳定性分析方法，为数值分析悬臂型弹性箔片径向动压气体轴承奠定了基础。 |
